 |
BOSUN CHAIR
|
ALPHA 1000
COM PACT 750
and Model 4 hoists.
FEATURES
- Demountable
chair can be
disassembled
- Fits through an
18 in. opening
- Cable guide
- Extra back support
- Wheels for portability
| DESCRIP'TION |
PART # |
| Bosun Chair |
104-43 |
|
|
|
BOSUN SEAT
|
For Model 4 Hoists Only
FEATURES
- Provides access in tight situations
- Reinforced seat with back support.
- Fits through an 18 in. opening.
| DESCRIP'TION |
PART # |
| Bosun Seat |
104-44 |
|
| |
|
LOW PROFILE
KNOCK DOWN CAGE
|
Compact Cage that
makes overhead work easy
| FEATURES |
- Breaks down into components
- Fits through an 18 inch opening
- 1000 lb rated load capacity.
- 53"H X 37"W X 34.5"D
| DESCRIPTION |
PART # |
| Knock Down Cage |
106-203 |
| Wall Roller |
112-125 |
|
|
| |
|
FOLD-UP WORK CAGE
|
For use in limited access areas.
| FEATURES |
- Cage folds flat to pass through 18 inch openings
- Unfolds easily and assembles in minutes.
- 500 lb rated load capacity on each side of platform.
- 82"H X 70"W X 17.25"D
| DESCRIPTION |
PART # |
| Fold-Up Work Cage |
106-196 |
|
|
| |
 |
 |
|
| |
 |
Collapsible Aluminum
Work Cage |
Disasembles without hand tools
to fit through an 18" opening
|
Specifications |
Maximun
hoist
rated capacity |
1,000 lbs. |
Maximum live load |
750 lbs. |
Maximum live load with flydecks |
500 lbs. |
Unit weight with /
without flydecks |
250 lbs. /
150 lbs. |
| Overall dimensions |
36 3/8" w
40 1/2" d
79 1/2" h |
| Work space dimensions |
28" w
36" d
72" h |
Overall dimensions with
3 ft. flydecks |
108 3/8" w
40 1/2" d
79 1/2" h |
|
| |
 |
|
| Air Powered ACRO-BAT |
MODEL |
AB 80A |
AB 80AL |
Drive |
1-1/4 HP (0.93 kw)
Vane Type Air Motor |
Power Requirement |
120 PSI at 60 CFM
(827 KPa at 1.7 m³/Min.) |
120 PSI AT 60 CFM
(827 KPa at 1.7 m³/Min.) |
Rated Capacity |
750 lb. (340 kg) net
1000 lb. (454 kg) gross |
700 lb. (318 kg) net
1000 lb. (454 kg) gross |
Vertical Speed |
0 - 30 FPM Variable |
(0 - 9 m/Min.) |
Drum Capacity |
350 ft. (107 m)
5/16" (8 mm) wire rope |
800 ft. (244 m)
5/16" (8 mm) wire rope |
Dimensions |
28 x 36 x 69 inches
(71 x 92 x 175 cm) |
28 x 36 x 72 inches
(71 x 92 x 183 cm) |
Weight |
190 lb. (86 kg) |
210 lb. (95 kg) |
UL Classified CSA
Certified |
|
|
|
| |
| |
 |
WORKCAGE
A workcage is a standard configuration of the Altrex suspended
platform system. It is a platform of 3' 9" or 6' 9" ft.
(1 or 2 meters)
with just one walkthrough stirrup
and one suspension point.
Workcages are a practical solution
in case of narrow working conditions
All workcages must be assembled as detailed in the platform
configuration
table (below). This is how the platforms were tested and classified by U.L.
This chart takes into considuration that 1 powered scaffold hoist will be
used. Any platform configuration not listed on this chart must be designed
and tested under the guidance of a professional engineer. Total platform
weight does not include weight of hoist, material or workers. Rated working
loads must be evenly distributed on platform.
Dual purpose
walk-through stirrups allow you to construct continuous
runs, or assemble various size workcages.
TECHNICAL DATA
| Workcage |
|
3'9" ft
1
m |
6'9" ft
2 m |
| Total weiqht |
lbs
kg |
200
90 |
230
105 |
| Max. rated workinq load |
lbs
kg
|
330
150 |
660
300 |
CONFIGURATION TABLE
| Description |
Part
Nr. |
Required Components
for workcage length |
1 m |
2 m |
| Sideframe 1 n (UL) |
421061 |
2 |
|
| Sideframe 2 n (UL) |
421062 |
|
2 |
| Alu deck 1 m Halfopen (UL) |
422901 |
1 |
|
| Alu deck 2 m Halfopen (UL) |
422902 |
|
1 |
| U-frame without guard-rail post (UL) |
421508 |
2 |
2 |
| Guard-rail post (UL) |
421520 |
4 |
4 |
| Guard-rail 1 m (UL) |
422011 |
2 |
|
| Guard-rail 2 m (UL) |
422012 |
|
2 |
| Caster wheel (UL) |
423010 |
4 |
4 |
| Wall roller |
423030 |
2 |
2 |
| End guard-rail (UL) |
423072 |
2 |
2 |
| Walk-throuqh stirrup |
on req. |
1 |
1 |
|
|
| |
| |
| |
|
