Cages & Bosun Chairs

Share

 

Bosun Chair
 

ANGEL WINGS
 

Sky Climber

BOSUN CHAIR

Bosun Chair 104-43

ALPHA 1000
COM PACT 750
and Model 4 hoists.
FEATURES

  • Demountable
    chair can be
    disassembled
  • Fits through an
    18 in. opening
  • Cable guide
  • Extra back support 
  • Wheels for portability
DESCRIP’TION PART #
Bosun Chair 104-43

BOSUN SEAT

Bosun Seat 104-44

For Model 4 Hoists Only

FEATURES

  • Provides access in tight situations
  • Reinforced seat with back support.
  • Fits through an 18 in. opening.
DESCRIP’TION PART #
Bosun Seat 104-44

LOW PROFILE
KNOCK DOWN CAGE

Sky Climber

Compact Cage that
makes overhead work easy
FEATURES
  • Breaks down into components
  • Fits through an 18 inch opening
  • 1000 lb rated load capacity.
  • 53″H X 37″W X 34.5″D
DESCRIPTION PART #
Knock Down Cage 106-203
Wall Roller 112-125

FOLD-UP WORK CAGE

Sky Climber Fold Up

For use in limited access areas.
FEATURES
  • Cage folds flat to pass through 18 inch openings
  • Unfolds easily and assembles in minutes.
  • 500 lb rated load capacity on each side of platform.
  • 82″H X 70″W X 17.25″D
DESCRIPTION   PART #
Fold-Up Work Cage 106-196
Hi Lo Climber
HiLo Fold Down
Power Climber

Collapsible Aluminum Work Cage

Disasembles without hand tools
to fit through an 18″ opening

PC

Power Climber 1

 

Specifications
Maximun hoist
rated capacity
1,000 lbs.
Maximum live load
750 lbs.
Maximum live load with flydecks
500 lbs.
Unit weight with /
without flydecks
250 lbs. /
150 lbs.
Overall dimensions

36 3/8″ w
40 1/2″ d
79 1/2″ h

Work space dimensions
28″ w
36″ d
72″ h
Overall dimensions with
3 ft. flydecks
108 3/8″ w
40 1/2″ d
79 1/2″ h
Acro-Bat
Acro Bat
Air Powered ACRO-BAT

MODEL

AB 80A

AB 80AL

Drive

1-1/4 HP (0.93 kw) Vane Type Air Motor

Power Requirement

120 PSI at 60 CFM
(827 KPa at 1.7 m³/Min.)

120 PSI AT 60 CFM
(827 KPa at 1.7 m³/Min.)

Rated Capacity

750 lb. (340 kg) net
1000 lb. (454 kg) gross

700 lb. (318 kg) net
1000 lb. (454 kg) gross

Vertical Speed

0 – 30 FPM Variable

(0 – 9 m/Min.)

Drum Capacity

350 ft. (107 m)
5/16″ (8 mm) wire rope

800 ft. (244 m)
5/16″ (8 mm) wire rope

Dimensions

28 x 36 x 69 inches
(71 x 92 x 175 cm)

28 x 36 x 72 inches
(71 x 92 x 183 cm)

Weight

190 lb. (86 kg)

210 lb. (95 kg)

CSA Certified

Acro Bat fold Down
2
Altrex

WORKCAGE

A workcage is a standard configuration of the Altrex suspended
platform system. It is a platform of 3′ 9″ or 6′ 9″ ft. (1 or 2 meters)
with just one walk­through stirrup and one suspension point.
Workcages are a practical solution in case of narrow working conditions

All workcages must be assembled as detailed in the platform configuration
table (below).
This chart takes into considuration that 1 powered scaffold hoist will be
used. Any platform configuration not listed on this chart must be designed
and tested under the guidance of a professional engineer. Total platform
weight does not include weight of hoist, material or workers. Rated working
loads must be evenly distributed on platform.

Workcage

Dual purpose walk-through stirrups allow you to construct continuous
runs, or assemble various size workcages.

TECHNICAL DATA
Workcage  
 
3’9″ ft
1 m 
6’9″ ft
2 m
Total weiqht

lbs
kg

200
90
230
105
Max. rated workinq load
lbs
kg
330
150

660
300

 

CONFIGURATION TABLE
Description
Part
Nr.
Required Components
for workcage length
1 m
2 m
Sideframe 1 n
421061
2
Sideframe 2 n
421062
2
Alu deck 1 m Halfopen
422901
1
Alu deck 2 m Halfopen
422902
1
U-frame without guard-rail post
421508
2
2
Guard-rail post
421520
4
4
Guard-rail 1 m
422011
2
Guard-rail 2 m
422012
2
Caster wheel
423010
4
4
Wall roller
423030
2
2
End guard-rail
423072
2
2
Walk-throuqh stirrup
on req.
1
1

 


Share